13MM CHUCK 650W HAMMER DRILL (INDUSTRIAL)
• CE approved
• Rated voltage: 230-240V
• Frequency: 50/60Hz
• Input power: 650W
• Impact rate: 48000bpm
• No load speed: 0-3000/min
• Chuck: Ø13mm
• Max in wood: 25mm
• Max in steel: 13mm
• Max in concrete: 13mm
• Accessories contain
• 1pc side handle
• 1pc 13mm KEY CHUCK
• 1pc depth guage(plastic)
• Packing: color box
| STOCK NO. | SIZE | QTY./CARTON |
| 79504 | 650W/13mm | 8 |
Related products
BENCH GRINDER
| STOCK NO. | SIZE | WHEEL SIZE | QTY./CARTON |
| 79646 | 150W | 6"/150x16x12.7mm | 1 |
| 79646-BS | 150W | 6"/150x16x12.7mm | 1 |
| 79648 | 350W | 8"/200x20x12.7mm | 1 |
| 79648-BS | 350W | 8"/200x20x12.7mm | 1 |
350W DRILL PRESS
• Voltage: 230V • Frequency: 50Hz • No load speed: 620-2620/min • 5 spindle speeds • Spindle travel: 50mm • Spindle taper: B16 • Chuck capacity: 13mm • Table size: 160x160mm • Base size: 290x190mm • Max. distance from spindle end to surface of table: 220mm • Gross weight: 16kgs • Machine height: 580mm • Packing: color box
| STOCK NO. | SIZE | QTY./CARTON |
| 79650 | 350W | 1 |
750W DRILL PRESS (INDUSTRIAL)
• Voltage: 230V • Frequency: 50Hz • No load speed: 180~2770/min • 16 spindle speeds • Spindle travel: 80mm • Spindle Taper: MT2 • Chuck capacity: 16mm • Table diameter: Ø290mm • Table tilt: 45° left and right • Base size: 460x270mm • Max. distance from spindle end to surface of table: 725mm • Net weight:55Kgs • Machine height:1580mm • Packing: carton box
| STOCK NO. | SIZE | QTY./CARTON |
| 79654 | 750W | 1 |
650W HVLP FLOOR BASED SPRAY GUN
| STOCK NO. | SIZE | QTY./CARTON |
| 79579 | 650W | 4 |
2000W HOT AIR GUN
| STOCK NO. | SIZE | QTY./CARTON |
| 79792 | 2000W | 10 |